Its recommended that you use about 180gr of 
Kluber Grease GLK 1301 (pic#1)

Contact Daniel Pass for Kluber Grease, type in the part number in the upper left corner 70000789 at www.ricambiamerica.com/ they can also provide you with the triple seals.

1. After you have emptied the flywheel assembly you can start with the re-greasing procedure, try to make the surface as smooth as possible, filling in all holes etc (pic#2-7)















Once you're done, put the flywheel cover back on, not forgetting the big O-ring, and tighten up the bolts progressively so that the "lid" tightens down smoothly.
This prevent you from causing damage to the O-ring. 
(pics#8-9-10-11-12-13)













You're now finished with the re-greasing procedure and the re-assembly of the flywheel, plesae continue to the next chapter from the Main Menu to re-assamble the flywheel and bell housing and to finish off the job.

Now, move on to chapter 6 from the Main Menu.



All material are copyright to webmaster.